CW and Programmable Sweep Transmitter | 100 MHz – 2.5 GHz (OP714)

Portable transmitter for network commissioning and design

The OP714 is a portable calibrated transmitter, supporting in-building DAS and BDA testing with fixed and sweep features for network design and commissioning of critical communications and cellular networks. It is pre-programmable for use in the equipment room and throughout the coverage area, with multiple transmission modes and support for multi-frequency testing. Also available with calibrated data as OP714-A.

View Datasheet

Features

  • Small form factor and lightweight
  • Amplitude: -40 to +10 dBm
  • Sweep: programable frequency steps multiples of 2.5 kHz and programmable time steps of multiples of 100ms
  • Controllable over USB

Applications

  • In-building and outdoor network design
  • Antenna verification and troubleshooting
  • Commissioning tests in the equipment room

Frequency Range

  • 100 MHz – 2.5 GHz

Specifications

Frequency Range 100 MHz – 2.5 GHz (usable down to 80 MHz)
Frequency Resolution < 1 Hz
Output Power -40 dBm to +10 dBm
Timebase
  • Accuracy (excluding temperature drift): ± 5 ppm / year
  • Temperature Drift: typically 0.2 ppm / °C
  • Adjustable to ± 1 ppm
Typical SSB Phase Noise (1 GHz)
  • 100 Hz Offset Frequency: -68 dBc/Hz (typical)
  • 1 kHz Offset Frequency: -88 dBc/Hz (typical)
  • 10 kHz Offset Frequency: -102 dBc/Hz (typical)
  • 100 kHz Offset Frequency: -105 dBc/Hz (typical)
  • 1 MHz Offset Frequency: -132 dBc/Hz (typical)
AM/FM
  • Modulation Rate: 30 Hz to 40 MHz
  • AM THD: < 1%
  • FM THD: < 0.1% (0.01% typical)
Pulse
  • Pulse Width: 6 ns to 25 ms
  • Duty cycle minimum: 0.00025% (pulse period ≤1.0 s)
  • Duty cycle maximum: 99.9% (“off” time > 6 ns)
  • On / off ratio > 45 dB (typically 60 dB)
Multi-Tone
  • Tone count: 2 to 123 with optional center notch
  • Tone spacing: 1 kHz to 10 MHz
  • Tone Phase Relationship: parabolic or random
Operating Temperature Standard 32°F to 122°F (0°C to +50°C)
Dimensions 5.5″ x 2.25″ x 1.0″ (140mm x 57mm x 25mm)
Weight 0.5 lb. (227 gm)
Interface USB 2.0
System Requirements Windows Operating System, x64_86 architecture

Specifications subject to change without notice.

We can help you find the right solution for your network testing needs.

Click here to return to the top of the page